section width meaning in Chinese
断面宽度
Examples
- Short - limbed wall ( slw ) is defined as the shear wall with a ratio of section depth to width ( rdw ) being 5 - 8 . usually , the section width is 200 - 250 mm , and the depth is between 1 000 and 2 500 mm
短肢剪力墙是指墙肢截面高度与厚度之比为5 8的抗震墙，通常墙厚不小于200mm ，肢长在1000 2500mm之间，它介乎于异形框架柱和一般剪力墙之间。 - As is well known , the effective width depends on several factors , such as the cross - section width , the height of web , the spacing of span and so on . we can conclude that width / span ratio ( overhang width / span and central width / span ) is the governing factor of the effective width
影响箱形截面梁上翼缘有效宽度的因素很多,如上翼缘宽度、梁高、跨度以及结构体系等,通过大量计算表明宽跨比[翼缘部分宽度、箱室部分宽度与跨度的比值]是有效宽度的控制影响因素。 - The work done in this paper is mainly as follows : ( 1 ) the wide beam should intrude to the wall at some length to make the flexural stress uniform along beam section width , thus make full use of the beam ' s bearing capacity and avoid the shear failure in the concrete joint . and it also prevents stress focus and concrete crack in the local shear wall
关于宽梁与薄墙肢节点，可以得出以下几点初步结论：宽梁应该深入墙肢一定的深度，以使宽梁截面的弯曲应力沿着梁截面宽度分布均匀，充分发挥宽梁的抗弯能力，同时避免节点区混凝土的剪切失效，也避免剪力墙的局部因为受到的应力过大而拉裂。